Buddy Rhodes Concrete Products

Buddy Rhodes Bag Mix Calculator™

Use this tool to determine how many bags of material you should purchase for your concrete countertop project.

Countertop Measurements


Total surface area of your countertop. See "Additional Information" below for more information about how to calculate.

Perimeter of the countertop edge that will have an overhanging apron.

Percieved height of the countertop edge created by the overhanging apron, typically 3 – 9 inches.

Depth of the countertop apron, typically 1 – 2 inches.

Thickness of the countertop not accounting for the overhanging apron, typically 1 – 2 inches.
Total surface area of your countertop. See "Additional Information" below for more information about how to calculate.

Thickness of the countertop, typically 1 – 2 inches.
Dry mix needed:   lbs. (  bags)

*Calculations are based on the yield for a single 50# bag of Buddy Rhodes Craftsman Mix, GFRC Blended Mix, ECC Blended Mix, or equivalent when using GFRC or ECC Admixture Pack at recommended ratio.

Although we do our best to ensure the accuracy of these tools, Buddy Rhodes™ Concrete Products offers no warranty either expressed or implied as to the reliability of the information contained herein. Buddy Rhodes™ Concrete Products assumes no liability for loss or damage associated with use of this calculator. If this is a critical project, we encourage you to verify the results using the long-hand method of correlating the yield of the material with the dimensions of your countertop or surface.

Additional Information

How to Calculate Surface Area of a Simple Shape (formulas)

ShapeArea Formula
Rectangle length × width
Triangle ½ × base × height
Circle π × radius²
Half Circle ½ × π × radius²
Ellipse π × radius1 × radius2

How to Calculate Surface Area of a Complex Shape (example)

Step 1

An example "L-shaped" kitchen countertop schematic featuring a 45° corner, rounded edge, and knockout for a sink.

Step 2

We will consider the "full" countertop and the knockout areas separately.

Step 3

The countertop and knockout sections are broken into simple geometric shapes (rectangles, triangles, half-circles, etc.)

Step 4

Areas are calculated using appropriate formulas. The areas representing the countertop are added together, then the areas for the knockout sections are subtracted. In this example, the total surface area for the finished countertop is 5,220 in², or 36.25 ft²