RAMP Adhesion And Cure Promoter
RAMP™ is a low viscosity liquid polymer adhesion and cure promoter developed specifically to be used with the Buddy Rhodes Vertical Mix™ carvable concrete. Adding RAMP™ ensures proper cure of Vertical Mix and improved the overall physical properties. It also reduces water and salt absorption and greatly enhances freeze/thaw resistance.
This product has a limited shelf life and should be used as soon as possible. KEEP FROM FREEZING. Store and use at room temperature (73° F / 23° C). Wear long sleeves and disposable vinyl gloves in a well-ventilated area when using this product.
Use as an Adhesion Promoter
Apply a primer coat of RAMP™ before mixing and applying Buddy Rhodes Vertical Mix™ carvable concrete. Mix 100 parts RAMP™ with 100 parts water (50/50). Apply over all surfaces using a spray bottle, pump sprayer, or similar. Allow to become tacky before applying Vertical Mix. If primer dries completely, reapply and wait until tacky before proceeding.
Use as a Cure Promoter
Mix RAMP™ with clean water and Buddy Rhodes Vertical Mix™ in the following proportions:
34 lb (15.4 kg)
3 lb (1.36 kg)
7.5 lb (3.4 kg)
42 fluid oz. (1.24 l)
115 fluid oz (3.4 l)
IMPORTANT: Read the full technical bulletin for the Buddy Rhodes Vertical Mix before using.
RAMP™ Packaging Options and Corresponding Quantities of Buddy Rhodes Vertical Mix™