Concrete Sealing FAQs

9 Items

Set Descending Direction
  1. What is the coverage of your sealers per square foot? ICT PS1: The coverage will be approximately 200 ft2 per quart. ICT PS1-LS: The coverage will be approximately 200 ft2 per quart. ICT System (ICT CH Prep Concrete Sealer + ICT FS Seals): The coverage will be approximately 200 ft2 per quart. BR Reactive Polyurethane Sealer (RPS): When using the ...
  2. How do I care for and maintain my countertop once it has been sealed? Proper care and maintenance will provide years of trouble-free service from your concrete countertop.  Concrete is like other natural stone materials and should be sealed with a product intended for its use.  No matter what sealer was used you should promptly wipe up all spills and use ...
  3. If I spill something or notice a stain, what should I do? Often warm water alone will remove spills effectively, but neutral based cleaners such as mild dish soap, Simple Green or similar should be used for tough spills.  Avoid highly acidic or alkaline cleaners as these may etch the sealer or concrete itself, causing more harm over time through ...
  4. Care and Maintenance for all Sealers How do I care for and maintain my countertop once it has been sealed? Proper care and maintenance will provide years of trouble-free service from your concrete countertop. Concrete is like other natural stone materials and should be sealed with a product intended for its use. No matter what ...
  5. RPS Repair/Reseal Protocol What should I do if the stain or spill is not easily removed from a countertop sealed with Buddy Rhodes Reactive Polyurethane Sealer? Although Buddy Rhodes Reactive Polyurethane Sealer provides excellent stain protection, sometimes a harsh staining agent left on the surface will leave a mark ...
  6. BR Sealing System Repair/Reseal Protocol What should I do if the stain or spill is not easily removed from a countertop sealed with the Buddy Rhodes Sealing System? Although the Buddy Rhodes Sealing System provides good stain protection, sometimes a harsh staining agent left on the surface will leave a mark that cannot be removed with ...
  7. How to seal Vertical Mix I am using the Buddy Rhodes Vertical Mix. How should I seal my finished project? Vertical Mix should be sealed, especially exterior projects, to reduce water infiltration and to keep the project looking new. A silane/siloxane type sealer will limit the amount of moisture by blocking the pores ...
  8. ICT Streaking Repair Protocol I recently sealed my counter with your ICT reactive sealing system (PS1, PS1-LS or CH Prep + FS Seals) and I am seeing streaks. Why is the happening and what should I do? Streaking or application marks do occur with the ICT Sealer products. The most common reason is the sealer has been over ...
  9. What is the repair protocol for ICT and PS1 sealers? There is scratch on my countertop, and it was sealed with ICT Reactive Sealing System (PS1, PS1-LS or CH Prep + FS Seals). How do I repair it? Scratches: Most of the time scratches are an aesthetics issue due to over-application of sealer. Buffing takes the scratches away 9 times out of ...
per page